![Flashforge Creator 4 - linke/rechte Düsen Baugruppe HS 0,4mm/0,6mm - [3D Material-Shop]](http://3dmaterial-shop.de/cdn/shop/products/Nozzle-Assembly-HS_600x600_ed64e053-6a0d-421c-8d2a-4e851f85f443.png?v=1673102843&width=1080)
- Low stock - 10 items left
Flashforge Creator 4 - left/right nozzle assembly HS 0.4mm/0.6mm
This assembly is an original spare part for the Creator 4-S and consists of a hotend. The hotend is made of hardened material and is ideal for printing fiber reinforced materials. With two of these nozzle assemblies, the Creator 4-A (HT) can be converted to the Creator 4-S (HS).
Things to note:
Different diameters cannot be combined. If you are toying with the idea of combining the different extruder types (HT/HS/F), this is basically possible. However, this is classified as experimental on Flashforge's side and you do so at your own risk.
Alternatively, you can use the complete extruder assembly , as improper installation of the hotend can damage parts and installing the complete assembly is easier.
(Alternatively, you can use hotends from us. These are cheaper. However, improper installation of the hotend can damage parts and the assembly of the hotend is more complex and therefore more error-prone.)
- Finishes: right left
- Nozzle Diameter : 0.4mm / 0.6mm
- Filament diameter: 1.75mm
- Max. printing temperature: up to 360°C
- Characteristic: made of hardened material for wear-free printing of abrasive, fiber-filled materials
- Printing speed: up to 150 mm/sec.
- Materials: PA-CF,PA-GF, PET-CF, PP-CF, PP-GF, PC-ABS, PPS, PPS.CF, ..., as well as all standard materials
