Technical specifications
PRINT SETTINGS
- Nozzle Temperature: 250˚C - 270˚C
- Printing speed: 30mm/s - 50mm/s
- Bed temperature: 90˚C - 105˚C
- Bed surface: MAGIGOO PC / BUILDTAK
- Fan: OFF
Based on 0.4mm nozzle and Simplify 3D v.3.1. Printing conditions may vary depending on the printer and nozzle diameter.
MECHANICAL PROPERTIES
- Young's modulus: 2307 ± 60 Mpa
- Tensile Strength: 62.7±1.3Mpa
- Bending Strength: 100.4±2.7Mpa
- Charpy impact strength: 3.4 ± 0.1 kJ/m2
THERMAL PROPERTIES
- Glass transition temperature: 113˚C
- Vicat softening point: 119˚C
- Melting Temperature: N/A
REMARKS
- Drying settings: 80˚C for 8h
- Recommended support materials: PolySupport
Miscellaneous:
When printing with PolyLite™ PC, it is recommended to use an enclosure. For a large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part immediately after printing to relieve residual stress.