3DGence INDUSTRY F350 3D printer

High performance 3D printer - developed according to the Industry 4.0 concept

With the INDUSTRY F350, 3DGence closes the gap between the F340 and F421 3D printers. A powerful, versatile and innovative 3D printing system that conforms to the Industry 4.0 concept. The 3DGence INDUSTRY F350 delivers high-speed 3D printing and precise prototyping for fast and reliable results.

It's a prototyping workhorse that prints fully functional prototypes using a variety of materials. The 3D printer is optimized to get the best result in engineering materials and composites.

Key Features:

• Velocity - Accurate and rigid kinematic system
• Modular printing system - wide range of materials
• Ultra polymers (PEEK), technical grades (PC)
• Printing composites
• Soluble materials - carrier materials made of ESM 10, complex geometries
• 3DGence CLOUD - complete process control and monitoring
• Built-in SMM system for material detection
• Industrial Grade Accessories - Air Filter, Signal Tower and Backup Power Supply - SECURITY

The 3DGence INDUSTRY F350 is a dual extruder 3D printer for industrial applications where accuracy, speed, convenience and safety of the entire 3D printing process are crucial. 3DGence INDUSTRY F350 is also suitable for working with a variety of engineered materials including high performance thermoplastics.

Basic print module for 3DGence INDUSTRY F350, which allows to print the standard polymers, such as PLA, ABS, ASA, PA6/69, etc. The M280 module can also print soluble support structures from ESM-10

• dual extruder
• Predefined profiles for a variety of materials
  
• Soluble support material

M360 is a high-temperature INDUSTRY F350 module that allows users to print the models from engineering materials such as PC.

• dual extruder
• High-strength PC models

Module M500

M500 is one of the interchangeable INDUSTRY F350 modules which can reach extrusion temperature up to 500℃. This high temperature combined with the printer's heated chamber enables high-performance polymers such as PEEK to be printed. The M500 module can also print PEEK on the ESM-10 soluble carrier .

• dual extruder
• PEEK - High Performance Polymers
• ESM-10 - Soluble Support Material

	M280	M360	M500
printing temperature	Up to 280°C	Up to 360°C	Up to 500°C
nozzle diameter	0.5 / 0.5mm	0.4 / 0.4mm	0.4 / 0.4mm
model materials	ABS, ASA, PLA, PA6/69	personal computer	PEEK
supporting materials	HIPS (breakaway) ESM-10 (soluble)	ESM-10 (soluble)	ESM-10 (soluble)

Large heatable space

F350 is equipped with an actively heated build chamber that can reach 130°C.

The combination of heated build space and heated material chamber ensures that the prints made from high-performance polymers such as PC or PEEK are always of the best possible quality. The build chamber, heated to 130°C, allows for the printing of PC blends or polycarbonate copolymers to ensure that the expected nominal mechanical properties are achieved without warping or other print failures. There is also a jet intake sector housed in the chamber.

Smart Materials Manager

The NFC antenna from the Smart Material Manager (SMM) is located in the material shaft. When a spool is placed in the chute, it is automatically recognized and read - no additional action is required. The NFC system not only contains information about material weight, type and manufacturer, but can also write new data into the NFC tag.

Before each print job, available material and required material values ​​are compared. The user is informed of the possible need to load the second slot.

 

filtration

With the focus on high performance thermoplastics, it is becoming increasingly important to provide proper emission control. F350 filters offer unparalleled filter efficiency among the FFF AM platforms .

F350 uses an advanced ULT filter unit capable of filtering the following particles:

• macro dust
• Nanodust (VOC, UFP)
• solvent
• vapor (harmful gases)
• foreign particles

The system was specially developed for additive manufacturing purposes and is based on existing solutions for SLS technologies and welding. The unit has a 3-stage filter system and communication module that helps to use the control filter based on the pressure difference.

The 3-stage filter system consists of the following units:

1. Z-section perforated mat as pre-filter in G4 standard
2. H13 standard HEPA filter of filter efficiency of > 99.95%
3. activated carbon cartridge

Security

• An electronic lock of the main chamber door, which can also be controlled via cloud service and printer interfaces.
• Sensors for the main chamber door and the top access door
• Redundancy for thermal sensors of high power heating elements
• Emergency switch - instant power off and thermal control system

• Logic emergency shutdown system
• Software access overdrive - the printer can be shut down remotely .

UPS and Signal Tower

F350 can be equipped with a UPS unit. The printer supports all functions during short power failures. The UPS is integrated into the system at a deeper level and monitors the battery life of the UPS. If the power outage is longer, the printer will go into idle support mode. The printing process is halted and only the most important thermal control and logic functions remain. If power is restored, printing will resume normally. This dual approach can produce two outcomes:

• Unaffected printer performance during brief power outages
• longer battery life with longer power problems

In addition, as an accessory, 3DGence INDUSTRY F420 can be equipped with the signal tower showing the status of the print. The signal tower makes the machine easily visible from distant parts of the production facility.

3DGence Cloud

Remote Print Start, Cancel, and Pending . Full control over job and execution, even on multiple printers. Real-time monitoring of aggregation of machine and print status and display of access module for machine and material consumption statistics; 3DGence support team can access, diagnose and provide help remotely for file sharing and storage access control as well as for managing marketing functions. Live camera feed Asymmetric encryption for data transmission (RSA)

 

Scope of delivery and additional options

WHAT'S INCLUDED?

• 3DGence INDUSTRY F350 3D printer
• Accessory set (Wi-Fi module incl.)
• Emergency stop button

WHAT IS THE ADDITIONAL EQUIPMENT?

• The M280 dual extruder print module (+1 spool ABS, +1 spool ESM-10)
• The M360 dual extruder print engine (+1 spool PC, +1 spool ESM-10 )
• The M500 dual extruder print module (+1 spool PEEK, +1 spool ESM-10)
• UPS - emergency power supply
• Advanced filter unit
• signal tower

--

36-month manufacturer's warranty for uninterrupted and fast production.