The Constructions-3D Mini Printer makes it easy and intuitive to understand the challenges of 3D printing concrete structures. With a team of experts to advise you, easy-to-use software compatible with any design software and a machine with a mechanical structure optimized for the concrete environment, you can easily start your concrete 3D prints!
The mini printer is able to print with an accuracy of 0.5 cm on a working size of 660 x 520 x 700 mm. Thanks to the easy-to-use software, compatible with any design software, and the mechanical structure of the machine optimized for the concrete environment, you can start your 3D concrete prints with ease. Our team of experts is available to advise and support you with your 3D printing project.
PUMP SYSTEM | |
pump system | spray pump |
Type of corrodible material | Mortar. coatings. Glue |
filling the pump | per waste |
Groceries | 230V |
Maximum transport pressure | 30 bars |
Maximum transport distance | 30 m |
pump power | 4kW. 230V. 50Hz |
Usual material throughput | 5L / min |
Maximum flow rate | 50L/min |
Minimum flow rate | 1L/min |
Maximum grain size | 6mm |
Fiber Compatibility | Yes, up to 25mm and 2% by mass |
PRINTER | |
accuracy | 0.5 cm |
Print size (XYZ) | 660x520x700mm |
print speed | Up to 300mm/s |
Groceries | 220V single phase |
BUILDING MATERIALS-3D | |
Type | Specific mortar with cementitious base / dry material |
Minimum ambient temperature | + 5°C |
Maximum ambient temperature | + 35°C |
Start setting at 20°C | 30 min |
flexural strength | 12Mpa |
Mechanical compressive strength | 75Mpa |
grain size | 0-2mm |
ABRAMS cone weakening | 1 inch |
density | 2.2 |
Displacement under tension 75 kN | < 0.6mm |
Contains | 1.2 T BigBag or 25kg sacks |
preservation | 12 months from the date of manufacture, in the original unopened packaging |
Amount of water per 100 kg of material | 12L |