The All-New Wanhao Duplicator 4S introduces the newest addition to the Wanhao Duplicator 4 family! This dual extruder 3D printer is the latest update of the Duplicator 4 series. The inexpensive Wanhao 4S is really a wonderful device with a closed space. It offers all the advantages of Duplicator 4x. 3D printed ABS without warping! You can also build with support material.
The main product features:
- Very solid metal construction
- Valuable manufacturing machine
- Dual extruder allows carrier material
- Closed build environment minimizes warping
- 2 free spools in the box
- SimpliFy3D compatible
- Very good value for money
- When using this 3D printer and its software, your learning curve will be steep
The Wanhao Duplicator 4S comes in a black steel exoframe, making it very stable and anti-vibration. A heated build plate and a completely closed build surface characterize this inexpensive 3D printer. These features ensure accurate 3D prints and stable temperature. 3D printed with low warping and shrinkage. The Duplicator 4S is equipped with the new MK10 dual extruder set for manufacturing with construction and support material (necessary for overhangs of more than 45°).
Use two different colors or one of the extruders with HIPS or PVA as support material. Other features include improved electronics and 1/16 microstepping motor control. If you want to use the full potential of the 3D printer, we recommend you to buy SIMPLIFY 3D with this 3D printer. If you don't want to spend money, ReplicatorG software is included.
The Duplicator 4S features our latest 1.75mm filament extruder. This extruder was developed from scratch. It includes several custom parts. " We learned a lot about our previous extruder designs and applied a lot of those lessons here: That's why it's smaller, lighter and faster to build ," says Wanhao.
It is light years ahead of previous designs in terms of small filament reliability. Realize much better plane alignment resulting in more beautiful 3D prints and higher resolution of 100 microns. We have completely redesigned the drive system to achieve optimal positioning accuracy. The entire system has been upgraded to a stable 3/8 inch diameter linear shaft. This is probably an exaggeration, but you can trust the axles to be sturdy. Wanhao has also switched to self-aligning sintered stainless steel bearings. These are very forgiving for DIY assembly and make for a nice smooth movement on the steel shafts. The Z-axis has been completely replaced by a cantilever stage with a stepper driver. This is passed through two of the linear waves and eliminates any z-wiggle and results in well-aligned layers. With a high-angle lead screw, the Z-axis speed is increased from 150mm/minute to 1,000mm/minute. This means that the shift changes are almost imperceptible.
Connect the Wanhao 4S via USB and press the push button. The device calibrates itself and starts 3D printing. The new electronics have been developed to make the process flow easier than ever. The Duplicator 4S connects to your computer using a standard USB cable thanks to a USB chip on the motherboard. In addition, full endstop support has also been added so you never have to touch the XYZ axes again. When you click print, the device will automatically align, heat up and start 3D printing. All you have to do is sit back and relax while your Duplicator 4s does all the work for you. Living in the future is great. Oh yes, and the electronics are completely built inside the case, so there are no dangling wires anywhere.
Alternatively, you can transfer your print file to the 3D printer using an SD card. Sometimes the user fails to connect to computer USB because the computer has hibernated or shut down automatically. For this reason, an SD card reader was developed for this 3D printing system. Brilliant, all your production tasks can be done with this little card. A 2GB card is enough for each 3D file and stores as much data as you want. Simple and fast is our mission.
- Extruders: New MK10 twin extruders
- Filament Size: 1.75mm
- Special layer capacity: 0.1mm - 0.5mm
- Build space: 225mm x 145mm x 150mm
- Filament Capabilities: ABS, PLA, PVA, NYLON, HIPS and other popular filaments
- Software: ReplicatorG (open source)
- Warranty: 1 year limited warranty
- Frame Color: Black Steel Exoframe
- Heated build plate