RECOMMENDED SETTINGS
- Nozzle Temperature: 260˚C - 280˚C
- Printing speed: 30 - 50mm/s
- Bed Temperature: 100˚C - 115˚C
- Chamber Temperature: 100˚C - 110˚C
- Bed surface: Almost any surface with a thin layer of MAGIGOO PC
- Cooling fan: OFF
MECHANICAL PROPERTIES
- Modulus of elasticity: 1986 ± 85 (MPa)
- Tensile strength: 41.8 ± 0.9 (MPa)
- Bending strength: 64.4 ± 0.3 (MPa)
- Charpy impact strength: 21.4 ± 3 (kJ/m2
THERMAL PROPERTIES
- Glass transition temperature: 140˚C
- Vicat softening point: 139˚C
- Melting temperature: 223˚C
REMARKS
- Drying settings: 80˚C for 8h
- Recommended substrates: PolyDissolve™ S2
Miscellaneous:
When printing with Polymaker™ PC-PBT, we recommend using a heated chamber.
If a heated chamber is not used, it is recommended to anneal the printed part immediately after printing to relieve internal residual stress.
Annealing Settings: 90˚C for 2h