Technical specifications

RECOMMENDED SETTINGS

• Nozzle temperature: 250˚C - 270˚C
• Printing speed: 30 - 50mm/s
• Bed temperature: 90˚C - 105˚C
• Chamber Temperature: 90˚C - 100˚C
• Bed surface: almost any surface with a thin layer of MAGIGOOO PC
• Cooling fan: OFF

MECHANICAL PROPERTIES

• Young's modulus: 1832 ± 65 (MPa)
• Tensile strength: 39.9 ± 1.0 (MPa)
• Bending strength: 66.3 ± 1.3 (MPa)
• Charpy impact strength: 25.8 ± 1.4 (kJ/m2)

THERMAL PROPERTIES

• Glass transition temperature: 109˚C
• Vicat softening point: 135˚C
• Melting Temperature: N/A

REMARKS

• Drying settings: 80˚C for 8h
• Recommended supplies: PolyDissolve™ S2 (coming soon)

Miscellaneous:

When printing with Polymaker™ PC-ABS it is recommended to use a heating chamber.
It is recommended to anneal the printed part immediately after printing to relieve residual stress if a heated chamber is not used.
Temper Settings: 90˚C for 2 hours