Snapmaker 2.0 10W Laser Module

Up your game with the state-of-the-art laser beam splitters

The 10W laser module is equipped with the most modern laser beam splitters, which result in a power jump from 5W to 10W. This means you can now play with a greater variety of materials and create more projects.

The working speed of the 10W laser module can be up to 6000mm/min while cutting 8mm thick larch wood. For comparison: the cutting speed is up to 8 times that of the 1.6W laser module. It can literally complete a laser job in the blink of an eye.

It's not just about power, it's also about finesse

With the Fast Axis Collimating (FAC) lenses embedded in the two laser diodes, the module first compresses the laser spot of each laser diode. It then combines the laser beams from the two laser diodes using beam combining technology, resulting in higher output power and an ultra-fine laser focus (0.05mm x 0.2mm) that enables higher energy density. A smaller laser focus and higher power enable high-quality laser work with impeccable details.

Get started, Snapmaker will take care of the rest

The unique wind tunnel inside the 10W laser module provides excellent wind pressure that blows the fumes away while the laser beam is cutting into the material, and sends the fumes straight into the grids of the laser engraving and cutting platform, where they are then dissipated, which is what reduces their interference with laser processing.

Auto focus within seconds

No more manually measuring material. Place your material on the platform and the module will calculate it for you. Thanks to the triangulation technique, the module is able to measure the thickness of your material by capturing a few data sets from the camera and the light emitter. It then adjusts itself in the Z direction so that the focal point falls exactly on the material surface. Focusing can be completed in a few seconds.

Tailor-made software Snapmaker Luban that turns every beginner into a pro

With Snapmaker Luban, you can brush up on your basic skills and master more advanced tricks, from simple image transformation, to setting the right parameters for different materials, to cutting 3D models into laser-cuttable vectors.

• Ready-to-use material profiles
• Converts 3D model to 2D vector
• High adaptability

Orientation detection, safe and adventurous

For the protection of the user and any bystanders, Snapmaker has built a gyro sensor into the module, which ensures that no laser beam escapes if the module is incorrectly installed or deviated from its intended position.

A module with two ventilation systems

Prolonged exposure to high temperatures shortens the life of the laser diode. The 10W laser module features two separate ventilation systems for the PCBA and the laser diode to ensure the diode is properly cooled every time it is used. With proper use, the service life can be up to 8,000-10,000 hours.

Overheat protection, better play it safe

The module will automatically shut down if its temperature sensor detects a higher than normal (above 55°C/131°F) working temperature. As soon as the temperature falls back into the normal range, you can continue your work on the touchscreen.

Expandability, as always

The 10W laser module is compatible with all Snapmaker 2.0 series models except the 150 series and will be compatible with upcoming devices. You can also use it with the addons including the rotary module, emergency stop button, air purifier and CAN hub.