Full set bundle: Flashforge Creator 4 A-HT IDEX 3D printer in a complete package
BUNSZC4A
- Low stock - 10 items left
- Inventory on the way
Flashforge Creator 4 A-HT IDEX 3D printing
Bundle offer for 3D printing with carbon fiber reinforced and flexible materials: Flashforge Creator 4 A-HT IDEX 3D printer + 2x Extruder Assembly F (0.4mm nozzle diameter) + 2x Extruder Assembly HS (0.4mm nozzle diameter) + 1x PEI coated spring sheet + 2x coil mount.
Creator 4 is a solid stainless steel 3D printer with IDEX extruders. There are three types of extruders for this printer, here the 3D printer comes with the HT option for technical filaments. For more flexibility and print quality with the filament types to be printed, the Creator 4 A can also be converted to the HS option for carbon fiber reinforced materials or the F option for flexible filaments.
- HT extruder: 320°C for technical filament such as PLA,ABS, PETG, PP, PA etc.
- HS extruder: 360°C for carbon fiber reinforced filaments such as PACF, PETCF, PAGF etc.
- F-Extruder: 265°C for flexible filaments like TPU 85A, TPE, TPC etc.
- Large installation space of 400mm x 350mm x 500mm
- Independent dual extruder
- Heated build chamber, 65°C
- Pressure up to a temperature of 320°C
- Heated build plate - 120°C
- Intelligent filament management system
- HEPA 13 air filter
- Built-in camera
- Resume printing after power failure
Flashforge Creator 4-A HT
installation space
The Creator 4 is the perfect size for most applications. 400mm x 350mm x 500mm is ideal for prototyping.
Independent dual extruder
Unlike traditional dual extruders, the other extruder is not in the printing area of the model, so the filament will not drip, thus affecting the quality of the model. When printing the same model in series, the output is doubled, making it the best choice for mass production.
Heated build chamber
The advanced heat control software can preheat and hold the temperature before and after printing. The thermal control system maintains a constant chamber temperature of 65°C and reduces thermal contraction of the model during the printing process. It avoids the warping and cracking of ABS/PC/PA and other technical filaments and guarantees the quality and dimensional accuracy of the model, improving the printing success rate.
High printing temperature
With the included high-temperature extruder, you can print most filaments on the market today, thanks to an operating temperature of 320°C. Supported filaments: PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT
Heated build plate
The build plate can be heated to a temperature of 120°C, making it easier to print on ABS, nylon and similar materials.
Intelligent filament management
Before printing, the intelligent system can automatically adjust the temperature according to the type of filament. The intelligent setting that maintains a constant chamber temperature guarantees the success rate of the print. After the print, the intelligent control system helps to adjust the cooling temperature to be ready for the next print without waiting again.
Clean Air
The included HEPA 13 air filter ensures that hazardous vapors and particles are removed before they reach the outside of the printer.
control of the camera
The built-in camera gives you the opportunity to monitor the ongoing print and see the progress
Recovery after power failure
If your 3D print is interrupted, you can easily resume it. Save time, filament and money on interrupted 3D prints.
Technical specifications | |
Usable nozzle types | Flashforge Creator |
Usable filament diameter | 1.75mm |
Nozzle temperature max | 320ºC |
Open filament system | Yes |
extruder type | direct drive |
print area | 400mm x 350mm x 500mm |
Temperature of the building board max. | 120ºC |
material of the building board | Flexible steel plate |
panel attachment | magnetic |
Leveling system for the build plate | capacitive sensor |
Build chamber during the process | Open or Closed |
Build chamber heated | Yes, max 65°C |
Filament chamber closed | Yes |
number of extruders | 2 |
Extruder type Dual | IDEX - Independent twin extruders |
Installation space / requirements | |
overall dimensions | 840mm x 675mm x 1050mm |
total weight | 90kg |
operating ambient temperature | 15°C - 30°C |
Maximum power consumption | 2320W |
Tension | AC: 100V/240V, 30A (50-60Hz) |
Furnishing | |
Hepa filter | Yes |
Filament runout sensor | Yes |
Power Failure Fail Safe | Yes |
touch screen | Yes |
camera | Yes |
Connection | |
USB port | Yes |
Ethernet port | Yes |
WIRELESS INTERNET ACCESS | Yes |
cloud control | Yes |
accuracy | |
layer height | 0.05 - 0.4mm |
resolution | 0.2mm |
Shipment | |
shipping carton | 820mm x 990mm x 1260mm |
shipping weight | 130kg |
2x Flashforge HT extruders for standard material
1x Solid wooden box packaging (150kg total weight)
1x flexible building board covered with black tape
2x filament
2x hot-end assembly
1x pair of gloves
1x small tool
1x Flashprint Slicer from Flashforge